Modular industrial aluminum framing
Euro T-Slot 6060 Series
Euro T-Slot 6060 Series is a 60 × 60 mm aluminum extrusion family for modular equipment frames, workstations and automation supports. Compare separate sections with 8.2 or 10.2 mm groove openings, then specify the drawing, connections and cut-length list your assembly needs. The quotation target is 6063-T5 aluminum with an anodized finish; the selected section and actual supply are confirmed during quotation.
AI-generated Euro T-Slot 6060 product concept with a satin silver surface; actual section and finish require confirmation.
6060 specifications for quotation
- Profile category
- T-Slot Extrusions
- Profile series
- 6060
- Section and groove targets
- 60 × 60 mm; 8.2 / 10.2 mm groove-opening targets; selected drawing governs supply
- Target alloy
- 6063
- Target temper
- T5
- Profile system
- Euro T-slot system
Illustrative product views
6060 profile concepts and aluminum surface detail
These AI-generated images are concept illustrations, not supplied-product photographs or dimensional drawings. Groove count, internal geometry and surface appearance are illustrative. Confirm the actual section and finish against the selected production drawing and approved sample before ordering.
Choose the groove system before the hardware
A 60×60 T-slot aluminum profile name describes the outer section, not a universal connection interface. Hoonly's manufacturer reference below documents separate 8.2 and 10.2 mm groove openings with different internal layouts. Select the complete section first, then check the T-nut, bracket, bore and end-connection dimensions. The two openings listed here are quotation targets for different profile variants.
- For an 8 mm groove system, verify the actual 8.2 mm opening and the complete slot cavity, groove pitch and connector engagement against the selected drawing.
- For a 10 mm groove system, verify the actual 10.2 mm opening, groove depth, center bore and fastening method; do not assume 8 mm hardware transfers.
- Choose light or standard sections using documented section properties, span, loads and connections. A larger outer section alone does not establish frame stiffness or load capacity.
Specify the anodized finish
- Anodized
Where to evaluate a 60×60 modular profile
A 6060 aluminum profile can be considered for a modular structure that needs a 60 × 60 mm envelope and compatible T-slot connections. Evaluate the selected variant and complete assembly against your loads, deflection limits and interface requirements.
- Modular equipment and automation frames
- Workbenches and inspection stations
- Conveyor supports and adjustable fixtures
- Equipment enclosure and guarding frames
Turn your 6060 drawing into a clear RFQ
Start with the variant reference or cross-section drawing and identify the required groove system. List each cut length with its piece count, length tolerance and end condition. Add the anodized color or appearance sample, coating requirements, machining locations, mating hardware and destination. For an existing assembly, attach the connector drawing as well as the profile drawing. Wall geometry, mass per meter, section properties, available lengths, price, minimum order and lead time are confirmed for the selected variant during quotation.
Manufacturer references for 6060 profile selection
These resources document the named manufacturers' products and explain why the complete section matters. They are not APW production drawings, supply guarantees, certification or accessory compatibility approvals.
- Hoonly 60-series groove and section referenceDocuments separate 60 × 60 mm variants with 8.2 and 10.2 mm groove openings, different bores and internal layouts. Use the relevant manufacturer's drawing when comparing interfaces.
- MISUMI 6060 standard and light profile catalogDocuments MISUMI's 6063-T5, clear-anodized 6060 sections and their individual properties. Its weights, lengths and performance data apply to the specified MISUMI variants.
Euro T-Slot 6060 selection and purchasing questions
What does 6060 mean in a T-slot aluminum profile name?
In this product name, 6060 means the nominal 60 × 60 mm square cross-section. It does not identify the aluminum alloy. This page uses 6063-T5 as the quotation target; confirm the actual alloy and temper on the selected supply specification. EN AW-6060 is a separate alloy designation.
What is the difference between 8 mm and 10 mm 6060 groove systems?
They are different section and hardware interfaces. The quotation targets here are 8.2 and 10.2 mm groove openings. Hoonly's reference documents differences in groove depth, bore arrangement and internal webs between its corresponding variants. Nominal slot size alone does not establish compatibility: check the complete section and connector drawings.
Can I use Bosch Rexroth, item or MISUMI accessories with this profile?
Compatibility is not established by the Euro, 6060 or nominal slot-size name. Provide the accessory part number and mating drawing so the groove opening, cavity, pitch, bore and fastening method can be checked for the selected profile. The external manufacturer references are selection context, not compatibility approvals or a claim that APW supplies those brands.
What are the wall thickness and weight per meter of a 6060 extrusion?
There is no single wall thickness or weight for every 60 × 60 mm profile. Light and standard variants have different webs, cavities and section properties. This page does not specify a shared wall-thickness range or mass. Request the drawing and variant-specific technical data; use those data with your span, loads and connection design when evaluating the assembly.
Which alloy, temper and finish should I include in the RFQ?
The quotation target on this page is 6063-T5 aluminum with an anodized finish. MISUMI's referenced 6060 catalog documents 6063-T5 and clear anodizing for its own standard and light sections. Specify your required color, appearance and coating requirements, then confirm the actual material and finish for the chosen supply variant. The reference does not certify APW supply.
Can I request specific cut lengths and machining?
Include each required length in millimeters with a piece count and tolerance. Provide end conditions and dimensioned hole, tapping or machining requirements where relevant. These are buyer requirements for quotation; available lengths, machining feasibility and tolerances are confirmed before ordering.
How should I compare 6060 with 4545 or 4040 profiles?
Compare the 60 × 60, 45 × 45 and 40 × 40 mm section envelopes, then compare actual groove interfaces, wall layouts, section properties, frame spans and connection methods. A 6060 outer dimension does not by itself prove a stiffer or higher-capacity assembly. Use the linked 4545 and 4040 pages for their own specifications and check hardware compatibility separately.
What information is needed for a Euro T-Slot 6060 quote?
Send the variant reference or drawing, groove requirements, material and finish requirements, individual lengths with quantities, tolerances, machining and accessory details, and delivery destination. Use the inquiry form or WhatsApp to discuss the requirement. Price, minimum order, availability and lead time are confirmed during quotation.
Compare other Euro T-slot profile sizes
Euro T-Slot 4545 Series
Review the 45 × 45 mm section and its own groove and wall options.
Euro T-Slot 4040 Series
Compare a 40 × 40 mm envelope and its separate connection requirements.
Euro T-Slot 3030 Series
Review a 30 × 30 mm section with an 8 mm slot option; confirm interfaces before combining sizes.
Send your Euro 6060 profile requirement
Share the selected section, mating hardware, cut-length list and finish requirements for a specification-led quotation.
Browse aluminum profiles